Miscellaneous Grips/Pads/Stocks

The Pro 700 Lite surrounds its billet aluminum chassis with Magpul polymer for enhanced ergonomics, strength, and sound mitigation. Built around the user, it is fully ambidextrous at the swap of a bolt retainer plate, and the vertical grip can be...

The Magpul Pro 700L Rifle Chassis is an uncompromising, full featured precision rifle chassis for long action Remington 700 and Remington 700-footprint rifles. The Pro 700L combines innovative engineering, precision machining, Mil-Spec quality finishes,...

The Magpul Pro 700L Rifle Chassis is an uncompromising, full featured precision rifle chassis for long action Remington 700 and Remington 700-footprint rifles. The Pro 700L combines innovative engineering, precision machining, Mil-Spec quality finishes,...

Masterpiece Arms Mpa Competition Chassis, Fits Remington 700 Short Action Compchassisremsa-mb-rh-21Model: Competition ChassisFit: Remington 700 Short Action

Meeting the urgent requirement for an easy way to mount weapon lights and other accessories on the Benelli M4 semi-automatic shotgun, the new Truckee replacement forend provides industry standard M-LOK mounting points on both sides and the bottom...

The customized LimbSavers Classic Precision-Fit Recoil Pad is designed to specifically fit a variety of rifles, shotguns, and muzzleloaders, reducing felt recoil by up to 70 percent. The recoil pad enables you to shoot longer without discomfort and...

The customized LimbSavers Classic Precision-Fit Recoil Pad is designed to specifically fit a variety of rifles, shotguns, and muzzleloaders, reducing felt recoil by up to 70 percent. The recoil pad enables you to shoot longer without discomfort and...

The customized LimbSavers Classic Precision-Fit Recoil Pad is designed to specifically fit a variety of rifles, shotguns, and muzzleloaders, reducing felt recoil by up to 70 percent. The recoil pad enables you to shoot longer without discomfort and...

The Limb Saver AR-15/M4 Snap-On Recoil Pad securely snaps onto most six-position adjustable stocks to reduce felt recoil by up to 60 percent while reducing muzzle jump. The recoil pad helps increase the accuracy of follow-up shots and youll enjoy...

Precision fit for standard frame GLOCK 26" 27 models. THIS GRIP WILL ALSO FIT AND FUNCTION WELL ON THE FOLLOWING FIREARMS, THOUGH NOT SPECIFICALLY DESIGNED FOR A PRECISION FIT: GLOCK 26: Gen 5 (frame does not have finger grooves), GLOCK 30" 31" 32" 33"...

Featuring gentle palm swells, naturally positioned finger grooves and Hogues famous Cobblestone texture, Hogue HandALL grip sleeves provide unparalleled comfort and increased recoil absorption. Hogue HandALL grip sleeves have been engineered for a...

Precision fit for the following standard frame GLOCK Generations 1" 2 & 5 (9MM" 357 SIG, 40 S&W, 45 GAP): G19" G23" G32" G38Features :Gentle palm swells fit comfortably in handFinger grooves naturally position fingers for optimal gripTextured with Hogues...

Precision fit for the following standard frame GLOCK Generations 3 & 4 (9MM" 357 SIG, 40 S&W, 45 GAP): G19" G23" G32" G38Features :Gentle palm swells fit comfortably in handFinger grooves naturally position fingers for optimal gripTextured with Hogues...

Precision fit for the following standard frame GLOCK Generations 3 & 4 (9MM" 357 SIG, 40 S&W, 45 GAP): G17" G17L" G17 MOS, G18" G20" G21" G22" G24" G31" G34" G34 MOS, G35" G35 MOS, G37" 40" 41Features :Gentle palm swells fit comfortably in handFinger...

Precision fit for the following standard frame GLOCK Generations 1" 2 & 5 (9MM" 357 SIG, 40 S&W, 45 GAP): G17" G17L" G17 MOS, G18" G19X" G20" G21" G22" G24" G31" G34" G34 MOS, G35" G40" G41" G45Features :Gentle palm swells fit comfortably in handFinger...

Hera USAs AR-15 M4 IRS 7" Handguard is a free floating quad-rail design made from high-quality aluminum, and is built to handle the hardest use and abuse of tactical and competitive shooting. It is CNC milled from aluminum alloy and hard coated anodized...

Harris Engineerings Special Adapter Stud for Ruger Mini-14/Mini-30 will allow you to convert your Ruger Mini-14 and Mini-30 Standard and Ranch Rifles to accept a bipod. By installing this adapter, it will allow you to connect a variety of swivel stud...

Precision CNC machined from lightweight, solid aluminum with Type III Black Anodized Finish. MIL-STD 1913. Includes hardware and allen key for install.Features :CNC MachinedIncludes HardwareAnodized FinishSolid Aluminum

The Fortis SWITCH series is an extremely lightweight, yet robust free float rail system designed for the AR platform. When designing the SWITCH, we wanted a handguard that was easy to install, but also be able to quickly change rails for a variety of...

Use ERGOs Mossberg 500 Tactical Stock Adapter to install AR-15 type stocks and pistol grips on your Mossberg 500/590 shotguns. It can be used to shorten the length of pull on your favorite scattergun to a more manageable length. Any standard AR-15 grip...

Daniel Defense Pro Chassis System, Fits Remington 700 Short Action Footprint, Integral Arca Lock (rrs/area 419 Spec) Rail, Adjustable Buttstock And Cheek Riser, M-lok Forend, Ar-15 Style Grip, Accepts Aics Short Action Magazines, Cerakote Finish, Coyote...

Daniel Defense Ris Ii, Black, Rail Interface System Ii, Ar Rifles, Matte 01-004-08001-006Model: RIS IIFinish/Color: MatteFit: AR RiflesDescription: Rail Interface System II

The right foundation matters. The Christensen Arms MPR chassis is the same ultra-lightweight adjustable system found on the Modern Precision Rifle, now offered as an individual component. Born of our obsession with carbon fiber and brought up by hand in...

The Low Profile Bipod Kit comes with a specially modified Harris BRM-S 6"-9" bipod along with our LPHM MLOK mount. The leg extension buttons have been moved to the inside where they cant be accidentally hit when using the bipod as a barricade block...

The Low Profile Harris Mount MLOK rail grabber is designed to replace the current mounting plate and thumbscrew for Harris Engineering swivel style bipods. Incorporating a built in recoil lug and two socket head cap screws and clamp foot, the LPHM has an...

The Low Profile Bipod Kit comes with a specially made Harris BRM-S 6"-9" bipod along with our LPHM Picatinny mount. The leg extension buttons have been moved to the inside where they cant be accidentally hit when using the bipod as a barricade block...

Features :Requires two lugs and one 1913 slot to mount properlyAll steel constructionIncludes hex wrench

Bravo Company Bcmgunfighter, Quad Rail, Black, Picatinny Rail, Ar Rifles, 10" Bcm-qrf-10-556-blkModel: BCMGUNFIGHTERFinish/Color: BlackFit: AR RiflesDescription: Picatinny RailSize: 10

Bravo Companys BCMGUNFIGHTER PKMR (Polymer KeyMod Rail) Mid Length is a direct replacement handguard featuring a simple drop in design. It is for AR15s with a mid-length gas system and Mil-Spec front sight base. With its natural ergonomics, it is slim,...

Bravo Company Mcmr Rail Panel Kit, Flat Dark Earth, Mlok Compatible, 5.5", 5 Pack Bcm-mcmr-rp-fde-5Model: MCMR Rail Panel KitFinish/Color: Flat Dark EarthFit: MLOK CompatibleSize: 5.5

Bravo Companys BCM 3 Inch Nylon Picatinny Rail Section, M-Lok Compatible, is made of lightweight impact resistant polymer. It is made to the Mil-Standard 1913 Picatinny Arsenal Specifications and it features a snag resistant design while retaining...

Bravo Companys BCM 3 Inch Aluminum Picatinny Rail Section, M-Lok Compatible, is made of hard anodized aircraft aluminum alloy. It is made to the Mil-Standard 1913 Picatinny Arsenal Specifications and it features a snag resistant design while retaining...

Bravo Company Mlok Compatible Modular Rail (mcmr), Black, Mlok, Ar Rifles, 10.5" Bcm-mcmr-10-556-blkModel: MLOK Compatible Modular Rail (MCMR)Finish/Color: BlackFit: AR RiflesDescription: MLOKSize: 10.5

The MK2 buffer (7.4oz) is offered as a stand alone option to tune AR pattern rifles that are already equipped with the MK2 recoil mitigation system. Allows fine tuning for optimal reliability and ejection pattern on rifles that are over gassed whether...

The M-LOK Rail Cover is designed to fit most machined rails and polymer handguards. The soft no slip material and ribbing provides a sure grip, providing extra traction and heat resistanceFeatures :Press-In FitEach Rail Cover fills 3 M-LOK...

The Battery Grip Plug is a water and dust resistant storage core for the Type 23 and 22 P-Grips. Compatible with AA, 123A" CR2032 and MultiTasker NANO Tool.Features :Friction fit for easy removal/installWater and dust resistantAvailable in all standard...

Advanced Technology makes high quality firearm components for the AR PlatformFeatures :AR-10 Buffer TubeBuffer and Buffer Spring Included

The Advanced Technology Int. Commercial Buffer Tube Assembly fits most AR-15 and AR Variants. It is not compatible with AR10 or .308 Rifles. It is constructed of Military Type III Anodized, 6061 T6 Aluminum and is virtually indestructible. This package...

Meeting the urgent requirement for an easy way to mount weapon lights and other accessories on the Benelli M4 semi-automatic shotgun, the Truckee replacement forend provides industry standard M-LOK mounting points on sides and bottom. Machined from 6061...

Meeting the urgent requirement for an easy way to mount weapon lights and other accessories on the Benelli M4 semi-automatic shotgun, the Truckee replacement forend provides industry standard M-LOK mounting points on sides and bottom.Features :6061-T6...

Meeting the urgent requirement for an easy way to mount weapon lights and other accessories on the Beretta 1301 semi-automatic shotgun, the Truckee replacement forend provides industry standard M-LOK mounting points on sides and bottom.Features :Fits...

Mesa Tacticals LEO Gen II Telescoping Stock adapter and pistol grip system for the Remington 870 shotgun is made specifically with law enforcement in mind. The LEO Stock adapter system is designed to allow shooters the ability to fit AR style collapsible...

The Beretta A300 Utlima Patrol Shotgun is super popular. Along with that popularity comes all types of innovations, and customizations. One of the most sought after is replacing the original factory handguard or forearm with the Magpul Zhukov Handguard...

The Beretta A300 Utlima Patrol Shotgun is super popular. Along with that popularity comes all types of innovations, and customizations. One of the most sought after is replacing the original factory handguard or forearm with the Magpul Zhukov Handguard...

Keep a firm grip on your firearm and ensure stability with the Rival Foregrip. Perfect for controlling weapons in all kinds of shooting situations, tactical Rival Foregrips feature a lightweight skeletonized design. Constructed of durable aluminum, Rival...

The Socket Mount M-LOK Sling Loop attachment point, from Reptilia. Driven by the request of a military end user group, for an anti-snag, low profile, quiet M-LOK attachment.Features :Machined from a Single Piece of Billet 7075-T6 AluminumUniversal...

The Socket Mount M-LOK Sling Loop attachment point, from Reptilia. Driven by the request of a military end user group, for an anti-snag, low profile, quiet M-LOK attachment.Features :Machined from a Single Piece of Billet 7075-T6 AluminumUniversal...

Designed for the hunter, the the M5 Badger profile Hunting Bottom Metal eliminates hassles and holds up against the elements. The integrated magazine lock provides the user with adjustable tension control and the magazine release is part of the minimal...

Designed for the hunter, the the M5 Badger profile Hunting Bottom Metal eliminates hassles and holds up against the elements. The integrated magazine lock provides the user with adjustable tension control and the magazine release is part of the minimal...

Balancing your rifle is important when it comes to making consistent shots. It gives you more control over your rifle, and produces predictable recoil making it much easier for you to take accurate and quick follow-up shots. The MDT M-LOK External Forend...

A5 Spacer for the Stealth Recoil Spring or Sound Mitigation Buffer for A5 style stocks.Features :Fits A5 Style Stocks".75" Length,For the Stealth Recoil Spring or Sound Mitigation Buffer