Tactical Rails And Accessories

Mi handguard 308 combat rail 12.625" dpms high mlok sr25 Other Features: Dpms high compatible, for receivers with.210" tang height

Bcm rail section--nylon keymod 5.5" rail fde FEATURES-KeyMod Picatinny Nylon Rail Section-5.5"-Flat Dark Earth -Rail section is made of Lightweight Impact Resistant Polymer-Mounting hardware is made of Corrosion Resistant Stainless Steel-Made to the...

Bcm rail picatinny free float 12" black fits ar-15 FEATURES-12" Rail-Free float handguard eliminates loads from barrel, reducing the deflection for more accurate shooting-Precision Machined 6061-T6 Aluminum Alloy, for high strength &...

Troy battle rail covers 6.2" black 3-pk FEATURES-Black-6.2"-3 pack-Easily slides onto a Mil-Std Picatinny rail-Locks into place with a built-in retaining clip-Can be adjusted with a bullet tip-No tools required-Constructed from durable, heat &...

Battle arms 10" carbon fiber mlock handguard carbon fiber Other Features: 10" carbon fiber mlock handguard

Lancer handguard sig mcx 12" m-lok carbon fiber FEATURES:-M-Lok compatible slots at 12, 3, 6 & 9 O'clock, as well as bottom 45° faces-Turn-key replacement for OEM handguard-Around 40% lighter than OEM handguard-1.8" ID allows for over-suppressor use-1...

Bcm rail picatinny free float 8" black fits ar-15 FEATURES-8" Rail-Free float handguard eliminates loads from barrel, reducing the deflection for more accurate shooting-Precision Machined 6061-T6 Aluminum Alloy, for high strength &...

Mi ak alpha t2 mount for ak47/74 Other Features: Ak alpha series t2 mount only for use with alpha series handguards made in the usa

Odin forend o2 lite mlok 12.5" black ar-15 FEATURES-12.5" M-LOK O2 Lite Free Float Forend-Made from 6005-T651 aluminum-Hard anodized for durability-Inside Diameter: 1.6"-Outside Diameter: 1.8"W x 2.16"H-The O2 lite is a full 20% lighter than its...

Phase 5 handguard lo-pro slope nose 15" m-lok for ar-15 black FEATURES:-Developed to accommodate the features of our 7.5" LPSN quad rail to a longer 15" version-M-LOK is a modualr locking accessory mounting system that is direct attachmentmethod for...

Troy cqb vertical grip black fits picatinny rails FEATURES-Black-Made from Troy proprietary military-grade, chemical, biological & impact resistant polymer-Attaches to any Mil-Std rail without tools-Will not heat up during rapid fire or full auto...

Utg pro m-lok arca rail 7075t6 aluminum 7.9" black

Je handguard rail cover 5.5" tan 1 per pkg FEATURES:Easy to Install/RemoveLightweight PolymerPicatinny and Weaver AttachableRibbed for an Enhanced GripFor AR15 and other AR models

Troy rail section 4.2" black quick-attach w/qd swivel hole FEATURES-Black-4.2"-Secures with two screws to a backer on the inside of certain Troy rails-For use on Alpha, Delta, TRX 308, TRX Extreme, Troy HK rails, & T-22 Sport Chassis, M7 uppers & M7...

Bcm rail picatinny free float 10" black fits ar-15 FEATURES-10" Rail-Free float handguard eliminates loads from barrel, reducing the deflection for more accurate shooting-Precision Machined 6061-T6 Aluminum Alloy, for high strength &...

Odin forend o2 lite mlok 15.5" fde ar-15 FEATURES:-Free float-Aluminum-Engineered w/ advanced ergonomics for comfort & improved performance-Continuous/uninterrupted Picatinny Rail across the top-Accessory rails can be placed at 3, 6, & 9 o'clock...

Mossberg heat shield kit black 12ga for models 500 535 590 FEATURES:-Heat shield-Blued finish-Fits Mossberg 500 or 590 plain barrel shotguns*Not compatible with ghost ring sight barrels or A1 heavy-walled barrels

Kel-tec compact forearm for plr16 pistol synthetic black FEATURES-For the Kel-Tec PLR-16 Pistol-Complete with Picatinny rail-Allows the pistol to be held comfortably & safely Other Features: For pistols only includes all needed hardware

Aimshot qr rail adapter qr 60 mm picatinny rail 14mm riser FEATURES-Allows you to quickly remove or attach items to picatinny rail-Ideal for shorter optics/red dot sights that ou want to raise to co-witness lower in the window Other Features: ...

Mi handguard rossi 92 m-lok black Other Features: Fits rossi 92 rifle 13.625" aluminum handguard features a forward mounted sling swivel, 1 5-slot m-lok rail section

Bcm rail panel kit m-lok 5.5" fde 5 pack FEATURES-Ultra-slim & radiused surface to allows a "round" handguard feeling, from an Octagonal profile-Aggressive non-slip or non-reflective surface-Ventilated for cooling-Can be installed in either...

Ergo grip rail cover wedge lok m-lok compatible fde 4 pack! Other Features: Fits m-lok rails, seven slot, made in usa

Grovtec flanged push button bs keymod full rotating black FEATURES:-6060 T-6 Aluminum-Black Type III Hard Anodizing-KeyMod Mount system-Hardware included-Full Rotational

Aimshot quick release keymod adapter picatinny rail 140mm FEATURES:Height: 1.8Length: 8.0Width: 6.1Unlock with two button pressNo tools requiredBalck aodized 6061 T6 Balck anodized aluminum Other Features: Press & slide to securely connect.Aluminum...

Mi handguard winchester 94 m-lok black Other Features: Fits winchester 94 rifle 13.625" aluminum handguard features a forward mounted sling swivel, 1 5-slot m-lok rail section

Aimshot picatinny rail bipod mount FEATURES-Picatinny Quick Release Bipod Adapter-The Bipod Stud is compatible w/ traditional style Harris Bipods Other Features: Picatinny qr bipod adapter the bipod stud is compatible w/ traditional style harris bipods

Kel-tec compact forearm for su-16 synthetic black FEATURES-For the Kel-Tec SU-16-Complete with Picatinny rail-Allows the pistol to be held comfortably & safely Other Features: With bottom picatinny rail does not interfere with charlie-style folding...

Bcm raider m rail 10" m-lok compatible black fits ar-15 Other Features: Aluminum alloy

Mft extreme duty 10" mlok carbine rail system black Other Features: Exd free float handguard 7-sides of m=lok slots ant-rotation technology steel non-timing barrel nut

Mi handguard grm m-lok g4 14" fits ar-15 Other Features: 1 piece free float handguard, 5 slot m-lok rail included

Aimshot quick release keymod bipod adapter FEATURES:Height: 1.15Length: 6.75Width: 4.9Attaches with a snapFits most traditional style bipods Other Features: Attaches with a snap, fits most traditional style bipods

Bcm rail section--nylon keymod 5.5" rail black FEATURES-KeyMod Picatinny Nylon Rail Section-5.5"-Black-Rail section is made of Lightweight Impact Resistant Polymer-Mounting hardware is made of Corrosion Resistant Stainless Steel-Made to the Mil-Standard...

Grovtec rail section stock ar 6" 15 slot aluminum black FEATURES:-Allows the attachment of various 1913 Picatinny rail-mounted acessories such as lights, vertical grips, etc-Features beveled ends to reduce snagging & eliminate sharp corners &...

Bcm rail section--nylon keymod 4" rail black FEATURES-KeyMod Picatinny Nylon Rail Section-4"-Black-Rail section is made of Lightweight Impact Resistant Polymer-Mounting hardware is made of Corrosion Resistant Stainless Steel-Made to the Mil-Standard...

Ergo grip rail cover ladder picatinny coyote brown 3pk! FEATURES-Coyote Brown-3-pack-18-Slot Lowpro Ladder Rail Cover-Protects rails from damage & protects shooters from rail edges-Prevents damage to skin, gear & clothing that contacts rail edges-Molded...

Shadow systems cr polymer elite trigger assembly w/ bar

Rise handguard slimline 13.5" picatinny black ar-15< FEATURES:Length: 13.5"Inside Diameter: 1.35"Weight: 11.7 ozPicatinny upper rail systemIntegrated sling swivel mounting pointsPrecision CNC machined from 6061-T6 billet aluminum

Bcm rail section alum.Keymod 5.5" rail section black FEATURES-KeyMod Picatinny Aluminum Rail Section -5.5"-Black-Rail section is made of Hard Anodized Aircraft Aluminum Alloy-Mounting hardware is made of Corrosion Resistant Stainless Steel-Made to the...

Yhm picatinny angle mount 2-1/8" long 45 deg. FEATURES -3-slot Picatinny angle mount-Mounts scopes with30mm diameter bodies-Made from aircraft quality aluminum-Hardcoat anodized matte black to Military Specifications or better-Great when used with...

Ruger mark iii & iv 22/45 picatinny rail FEATURES: -Factory 1913 style picatinny rail for Mark IV™, Mark III™ & 22/45™-Rail fits firearms w/ factory pre-drilled receivers-Includes three screws-DOES NOT FIT MARK I & MARK II PISTOLS

Mi handguard grm m-lok g4 13.375" fits ar-15 Other Features: 1 piece free float handguard, 5 slot m-lok rail included

Mi handguard henry g2.44/.45 m-lok black Other Features: Will not fit a rifle with a forward barrel band, features a forward mounted sling swivel, 1 5-slot m-lok rail section

Mi m-lok rail section 9 slot fits m-lok rails FEATURES-9 slot-6061 aluminum, hard coat anodized-M-LOK mounting hardware included

Aimshot qr rail adapter qr 40 mm picatinny rail low profile FEATURES-Allows you to quickly remove or attach items to picatinny rail-Ideal for lights & lasers w/ smaller rail mounts

Bcm sling mount keymod qd does not include qd swivel FEATURES-KeyMod Quick Detachable Sling Mount-Low-Profile for increased mobility and decreased "snag" factor -Fits standardized KeyMod interface mounting holes -Fits standard push button, quick detach...

Mi handguard sp series 7" m-lok ar-15 suppressor comp. FEATURES:Inside diameter 1.75" Outside diameter 2.0"1.95" over mounting flatsHigh quality MIL-STD 1913 top railOne five slot Magpul M-LOK polymer rail section includedConstruction from 6061...

Guntec ultra light handguard 7" m-lok black FEATURES:-T6 Aluminum-Ultralight-Proprietary Barrel Nut included-M-LOK System-Rail System Slides over barrel nut & is locked up against receiver w/ 6 screws-Tight Fit up against receiver, which allows for a...

Adv.Tech.Heatshield standard shotguns black steel FEATURES-Steel Formed Shotgun Heatshield-Elongated Cooling Slots for Maximum Dissipation of Heat-Easy Installation - Simply Slide Over Barrel and Secure With Supplied Hardware-13-1/2" Long-Manufactured...

Bcm rail mcmr 8" m-lok black fits ar-15 FEATURES-8" Rail-Features M-LOK® compatible mounting system-Free float handguard eliminates loads from barrel, reducing the deflection for more accurate shooting-Precision Machined 6061-T6 Aluminum Alloy, for high...

Lancer handguard sig mpx 14" m-lok carbon fiber FEATURES:-14" handguard-Approximately 50% weight reduction vs OEM aluminum handguard-1.6" ID allows for over-suppressor use-M-Lok attachment system for greater compatibility w/ aftermarket accessories

Magpul hand guard moe sl ar15 carbine black! FEATURES-Narrow design replaces bulky M4 Carbine-type plastic hand guards-Easy to install utilizing existing delta ring & round front hand guard retaining cap with A2 front sightassembly*-Slots at the two,...

Mi handguard slh 10.5" m-lok fits ar-15 FEATURES:Inside diameter 1.3" Outside diameter 1.5"Overall length: 10.5"6061 Aluminum Type 3 Hard Coat AnodizedContinuous MIL-STD 1913 Picatinny Top railTwo Integral Anti-Rotation QD Sling SocketsBarrel nut and...

Bcm rail mcmr 15" m-lok black fits ar-15 FEATURES-15" Rail-Features M-LOK® compatible mounting system-Free float handguard eliminates loads from barrel, reducing the deflection for more accurate shooting-Precision Machined 6061-T6 Aluminum Alloy, for...

Mi m-lok rail section 3 slot fits m-lok rails FEATURES-3 slot-6061 aluminum, hard coat anodized-M-LOK mounting hardware included

Shadow systems elite trigger assembly gen 4 mr/dr/xr Other Features: Includes elite trigger, triggr bar, housing, spring 4-4.5 lbs connector fits glock 19/23/17/22 gen 3 versions

Mi handguard crm m-lok 17.5" combat rail fits ar-15 Other Features: 1 piece free float handguard, one m-lok rail section incl.

Bcm rail mcmr 13" m-lok black fits ar-15 FEATURES-13" Rail-Features M-LOK® compatible mounting system-Free float handguard eliminates loads from barrel, reducing the deflection for more accurate shooting-Precision Machined 6061-T6 Aluminum Alloy, for...

Armaspec picatinny rail covers m-loc 5 slot black Other Features: Aluminum includes hardware made in u.Sa.

Mi handguard crm m-lok 10.5" combat rail fits ar-15 FEATURES:Length: 10.50"Inside diameter: 1.3"6061 Aluminum Type 3 Hard Coat AnodizedBarrel Nut and Wrench Included2 Integral Anti-Rotation QD Sling Sockets4140 Heat Treated Barrel Nut and Torque...

Mft extreme duty 13.5" mlok carbine rail system black Other Features: Exd free float handguard 7-sides of m=lok slots ant-rotation technology steel non-timing barrel nut

J&e polymer mlok rail 4" 7-slot 2pk Other Features: Fits all m-lok handguards

Sako tactical rail trg 22/42 225mm x 21mm phosphate!

Je handguard rail cover 4" black 1 per pkg FEATURES:Color: BlackLength: 4"Lightweight PolymerPicatinny and Weaver AttachableEasy to Install / RemoveRibbed for an enhanced gripFor AR15 and other AR models

J&e stinger picatinny rail cover black 20pk FEATURES:Fits Picatinny and Weaver style railsCovers snap easily into place over exposed sections of rail Lightweight PolymerDurable weather and temperature resistant Other Features: Fits picatinny and...

Guntec air-lok handguard 5" m-lok black FEATURES:-Lightweight modular design w/ triangle cuts throughout the handguard-Barrel nut included-The rail system slides over the barrel nut & is compressed down w/ four screws giving the monolitihic top rail a...

Utg pro m-lok arca rail 7075t6 aluminum 9.4" black

Mi handguard slim line 14" m-lok fits ar-15 FEATURES:Inside diameter 1.3" Outside diameter 1.5"Overall length: 14"6061 Aluminum Type 3 Hard Coat AnodizedContinuous MIL-STD 1913 Picatinny Top railTwo Integral Anti-Rotation QD Sling SocketsBarrel nut and...

Shadow systems mr/dr/xr polymr elite trigger assembly w/ bar Other Features: Also fits glock 19/23/17/22 does not fit gen5

Mi handguard cz scorpion 6.75" m-lok black FEATURES:Length: 6.75"Width: 1.8"Internal diameter: 1.625"M-Lok slots at the 45 degree position16 full M-Lok compatible slots and 7 half slots Constructed of 6061 aluminum, hard coat anodized 2 anti rotation QD...

Adv.Tech.Forend standard for most 12ga.Pumps black syn FEATURES-No jamming!-Designed not to overlap the shotgun's receiver when cycling the pump action-Easy removal and installation-DuPont® extreme temperature glass reinforced polymer-Manufactured in...

Mi handguard sp series 10" m-lok ar-15 suppressor comp. FEATURES:Inside diameter 1.75" Outside diameter 2.0"1.95" over mounting flatsHigh quality MIL-STD 1913 top railOne five slot Magpul M-LOK polymer rail section includedConstruction from 6061...

Mi handguard grm m-lok g4 10.5" fits ar-15 Other Features: 1 piece free float handguard, 5 slot m-lok rail included

Manticore transformer rail 13" gen ii black for ar-15 FEATURES:-Includes rail, barrel nut, barrel nut wrench & 6 polymer grip panels-AR-15 Aluminum Free Float rail system w/ ability to intermix Keymod, M-LOK & polymer grip panels-8 QD sling swivel...

Cmmg revo keymod 5 slot assessory rail for keymod FEATURES-6061 T6 aluminum-Attaches to standard KeyMod free float hand guard systems to mount non-KeyMod accessories

Yhm diamond series forearm for ar-15 rifle length FEATURES-Diamond Series Forearm (Rifle Length)-Overall length: 12.58"-Made of 6061-T6 aluminum-Hardcoat anodized matte black to military specifications or betterAssemblies Include:-One Jamb Nut-One...

Bcm vertical grip mod 3 fde fits picatinny rails FEATURES-Gunfighter Vertical Grip Mod 3-Picatinny-Flat Dark Earth -Low-profile length for increased mobility and decreased "snag" factor.-The forward angle increases the rigidity of the forearm, while...

Mi handguard sp series 15" m-lok ar-15 suppressor comp. FEATURES:Inside diameter 1.75" Outside diameter 2.0"1.95" over mounting flatsHigh quality MIL-STD 1913 top railOne five slot Magpul M-LOK polymer rail section includedConstruction from 6061...

Guntec ultra light handguard ar308 12" m-lok black FEATURES:-T6 Aluminum-Ultralight-Proprietary Barrel Nut included-M-LOK System-Rail System Slides over barrel nut & is locked up against receiver w/ 6 screws-Tight Fit up against receiver, which allows...

Aimshot qr rail adapter qr 40 mm picatinny rail 14mm riser FEATURES-Allows you to quickly remove or attach items to picatinny rail-Ideal for shorter optics/red dot sights that you want to raise to co-witness lower in the window Other Features: ...

Guntec rubber insert covers 10pk m-lok black FEATURES:-Neoprene Soft Rubber-Slides into unused M-LOK slots-Gen 2 Design has protruding grooves for better grip-10 pieces/kit Other Features: Slides into unused keymod slot guntec packing 10 per kit made...

Lancer handguard sig mpx 6.5" m-lok carbon fiber FEATURES:-6.5" handguard-Approximately 50% weight reduction vs OEM aluminum handguard-1.6" ID allows for over-suppressor use-M-Lok attachment system for greater compatibility w/ aftermarket accessories

Utg pro monolithic m-lok handguard for mp5

Mi handguard crt picatinny 10" fits ar-15 FEATURES:-4140 heat treated barrel nut-Barrel nut & wrench included-Features patented 4140 heat treated torque plate-1913 picatinny top & side rail-Two integral anti-rotation QD sling sockets-10" length-Weight:...

Utg pro m-lok arca rail 7075t6 aluminum 14.2" black

Mi ak handguard w/rails fits mini draco ak pistols FEATURES:-Quality T-marked MIL-STD 1913 rails for lights, lasers & optics-Lightweight, rugged construction of hard coat anodized 6061 aluminum-Includes rail topcover-Installs in minutes using only the...

Manticore transformer rail 9" gen ii black for ar-15! FEATURES:-Includes rail, barrel nut, barrel nut wrench & 6 polymer grip panels-AR-15 Aluminum Free Float rail system w/ ability to intermix Keymod, M-LOK & polymer grip panels-8 QD sling swivel...

Daniel def.Offset rail assy.1 o'clock picatinny rail FEATURES-6061-T6 aluminum-Type III hardcoat black anodizing-Optimized for miniature red dot optics-Zero change in cheek weld for transitions-Super-fast transitions-Adaptable for other uses-Lightweight

Mi m-lok rail section 11 slot fits m-lok rails FEATURES:6061 aluminum, hard coat anodizedM-LOK(TM) mounting hardware includedMade in USA